Concrete Edging Calculator
This concrete edging calculator sizes garden borders, mower strips and landscape curbing: a long, narrow slab. Enter total run, strip width and depth — bag counts matter here because edging is classic small-batch work.
इस कैलकुलेटर का उपयोग कैसे करें
- अपने आयाम दर्ज करें — लंबाई के लिए फीट, मोटाई के लिए इंच.
- विकल्प समायोजित करें — अपव्यय प्रतिशत, बैग का आकार और आपके स्थानीय कंक्रीट की कीमत।
- अपने परिणाम पढ़ें — टाइप करते ही आयतन, बैग, वजन और लागत लाइव अपडेट होते हैं।
सूत्र
Edging volume = length × width × depth हल किया गया उदाहरण: 50 ft of 6 in wide × 4 in deep edging: 50 × 0.5 × 0.333 = 8.3 ft³ — about 14 × 80 lb bags.
Edging consumes less concrete than expected — a full 50-foot garden border at 6 × 4 inches is under a third of a yard — which is why it's usually a bagged-concrete project rather than a ready-mix order.
Curved borders are edging's specialty: measure length along the curve's centerline with a flexible tape or rope, and form with hardboard or plastic bender board. The volume math is unchanged.
Extruded landscape curbing machines use a drier mix and standard profiles around 6 × 4 inches — the same volume math applies, at roughly 1 bag per 3.5 linear feet.
अक्सर पूछे जाने वाले प्रश्न
concrete edging calculator के बारे में सामान्य प्रश्न।
How much concrete for garden edging?
Length × width × depth. A typical 6 × 4 in mower strip uses one 80 lb bag per 3.5 linear feet.
How deep should concrete edging be?
4 inches for mower strips and borders; 6 inches where vehicles may cross. Set on 2 inches of compacted base.
How do I measure a curved border?
Run a rope or flexible tape along the centerline of the curve and measure that — enter it as the length.
Does edging need reinforcement?
Usually not, but cut or tool a joint every 3–4 ft; long thin strips crack without frequent joints.
संबंधित कैलकुलेटर
कंक्रीट कैलकुलेटर परिवार के और उपकरण।